■測定値と仕様■ ・製品測定値 Body Depth : 11.5 mm Body Width : 24 mm Bushing Length : 11.5 mm Bushing Thread : M8X0.75 Hex Nut Thickness : 2.0 mm Hex Nut Width : 11 mm Insulation Resistance : ＞100 MΩ at 500VDC Life : 15,000 cycles Manual Soldering Max Temp for 3 sec. : 350 °C Max. Working Voltage : 250V Max Rotational Stopper Strength : 6Kgf Operating (Useable) Temperature : -10 °C to +70 °C Rated Wattage (Power) : 0.25W Rotational Torque : 20-200 gf-cm Shaft Diameter : 6 mm Sliding Noise : ＜ 47 mV Tap Residual Resistance : ?100 Ω Taper : Audio Tolerance : ±20% Total Rotational Angle : 300° ±5° Total Shaft Length : 21 mm Washer I.D. : 8.1 mm Washer O.D. : 14 mm Washer Thickness : 0.4 mm Withstand Voltage : 500 VAC for 1 min. ・パッケージ情報 Packaging Dimensions : 1.5 in. × 1.4 in. × 1 in. Weight (Packaging) : 0.032 lbs

■測定値と仕様■ ・製品測定値 Body Depth : 11.5 mm Body Width : 24 mm Bushing Length : 11.5 mm Bushing Thread : M8X0.75 Hex Nut Thickness : 2.0 mm Hex Nut Width : 11 mm Insulation Resistance : ＞100 MΩ at 500VDC Life : 15,000 cycles Manual Soldering Max Temp for 3 sec. : 350 °C Max. Working Voltage : 250V Max Rotational Stopper Strength : 6Kgf Operating (Useable) Temperature : -10 °C to +70 °C Rated Wattage (Power) : 0.25W Rotational Torque : 20-200 gf-cm Shaft Diameter : 6 mm Sliding Noise : ＜ 47 mV Tap Residual Resistance : ?100 Ω Taper : Audio Tolerance : ±20% Total Rotational Angle : 300° ±5° Total Shaft Length : 21 mm Washer I.D. : 8.1 mm Washer O.D. : 14 mm Washer Thickness : 0.4 mm Withstand Voltage : 500 VAC for 1 min. ・パッケージ情報 Packaging Dimensions : 1.5 in. × 1.4 in. × 1 in. Weight (Packaging) : 0.032 lbs

■測定値と仕様■ ・製品測定値 Body Depth : 9.2 mm Body Width : 17mm Bushing Length : 6.5 mm Bushing Thread : M7X0.75 C.C Torque : 100-350 gf-cm Hex Nut Thickness : 2 mm Hex Nut Width : 10 mm Insulation Resistance : ＞100 MΩ at 500VDC Life : 15,000 cycles Manual Soldering Max Temp for 3 sec. : 300 °C Max. Working Voltage : 200V Max Rotational Stopper Strength : 8Kgf Operating (Useable) Temperature : -10 °C to +70 °C Rated Wattage (Power) : 0.2W Rotational Torque : 20-300 gf-cm Shaft Diameter : 6.35 mm Sliding Noise : <47 mV Tap Residual Resistance : ?20 Ω Taper : Linear Tolerance : ± 20% Total Rotational Angle : 300° ±5° Total Shaft Length : 20 mm Washer I.D. : 7.2 mm Washer O.D. : 12 mm Washer Thickness : 0.4 mm Withstand Voltage : 500 VAC for 1 min. ・パッケージ情報 Packaging Dimensions : 1.3 in. × 1 in. × 0.8 in. Weight (Packaging) : 0.013 lbs.